Customer ratings for StattQualm SQuape A[rise] 22mm MTL RTA

I’ve been vaping for far too long. I started back in the early days and tried many, many atty’s, and ended up settling on a Luxe Mods RDA, and it’s been brilliant, and served me well for over 12 years. Changes to the legislation made this type of atty obsolete, and Luxe mods closed down, so I knew this thing was irreplaceable. Well, after 12 years, the insulators eventually burned out and it was verging on dangerous and therefore I reluctantly had to let it go.

I didn’t want to use a box mod, and wanted to stick with a normal straight 22mm battery mod from my Luxe kit, and looking around, 22mm RDA’s are hard to get hold of so the StattQualm SQuape A[rise] 22mm atty seemed the only way to go to fit my 22mm straight battery mod.

I was reluctant to go back to a tank mod but man this thing delivers! Clearly things have come a long way since I was searching for an atty that worked for me all those years ago. Build is straightforward, 27g kanthal in a 5mm 7 wrap microcoil worked straight out of the box and it was really easy to put together. A little fiddling with the deck insert size and its better than I could have hoped.

It doesn’t leak, its easy to work on, its tastes great and it just works. It’s a little taller than the Luxe setup, so it doesn’t fit so neatly into my jeans “condom” pocket, but I’m very impressed with the build quality, ease of use and flavour.

I’m still going to buy the StattQualm RDA when it becomes in stock in CDV again, just to see if RDA’s are obsolete, but I honestly can’t fault his bit of kit. Pretty impressed.

Been using the RTA for nearly a month. I would recommend this due to its quality, easy to build and wick, excellent airflow for tight draw with 0.8mm air pin, absolutely no leak even with a top fill tank, and spot on flavour!

I just received this RTA and overall I am pleased with it...great flavour and really looks good sitting on my di-codes Dani Micro that I also ordered at the same time.

I have owned and use older Squape tanks and have always found the Swiss made quality to be exceptional.

I have been using it so far without any airflow pins for a nice wide open draw which I like.

The only reason I deducted one star is the Open/Close/Airflow-Juice control at the bottom of the tank. I find it is almost impossible to turn by hand when the tank is off the mod...but even when it is screwed into the mod it requires a lot of downward pressure to move it to the 'O' closed position, and then when moving it to "1" to remove the build deck..."or to adjust the juice-airflow it also requires a lot of force to move it...and most of the times it unscrews the tank off the mod. I dis-assembled it twice..lubricated everything inside with VG...but still I cannot figure out why it does not move smoothly. Anyway maybe my unit was just a bit off.

But other than this issue I like it...and not leaking whatsoever.

I've been using the new tank model daily for over a month now, and I'm ready to share my thoughts. Initially, refilling can be tricky; remember to twist the tank before the top cap to avoid flooding. However, it recovers from a flood quickly with just a few puffs – a feature that deserves recognition.

I'm impressed by the leak-proof design, a significant step up from the early Squapes. The build deck is user-friendly, making coil installation a breeze. Plus, the ability to detach the tank from the build deck without emptying it is incredibly convenient.

The inclusion of various air flow holes is a thoughtful touch, ensuring there's a draw to suit almost any preference.

The quality of materials used is excellent throughout, utilised into a well matured design that works well. The high price point reflects this.

Overall, this tank is a well-thought-out piece of kit that has enhanced my vaping experience.

I was looking for a new MTL rta to go on my new mod, i had asked several people that owned one and all come back with glowing reviews so i purchased one and the 1.2 mm air flow disc. Arrived quickly and was super excited to build and try it, i have been vaping for 8 years and building for nearly as long i put a micro clapton in it. Unfortunately i just cant get the flavour from it that i get from my favourite juice (Sweet tobacco) i have tried numerous builds, coil height, and wicking but still muted flavour. I wanted to purchase the larger tank and chimney section so it was flush with the top of my mod but cant find the height specs for the extension. I will go back to trying it at some point but at the moment it sits in its box, such a shame.

Been looking at buying a StattQualm SQuape A[rise] for a while now, when the 22mm came out it really interested me, finally grabbed one. Yes, they are expensive but worth it, very well made.

Quick shipping as you always get from Crème de Vape, so far very pleased with it, easy to build on, easy to wick. Great flavour from my custards, I did wonder how it would compare to my Kayfun Lite, and its just as good, if not a touch better.

The only negative I would give this would be the installing of the air-pins, this is not an easy job, they just don’t want to plug in as I would have hoped, first attempt it pinged out and I spend 15 minutes searching for the damn thing on the kitchen floor.

Early days with this RTA but my Kayfun Lite is back in the box for now.

Not much of a MTL fan. But I decided to give it a shot since I love all of StattQualm products. I was absolutely shocked, fantastic flavor and smooth air flow. Creme De Vape staff was awesome, helped me with my first overseas purchase. I was nervous, but they made the process smooth. There aren't many stores remaining in the United States, selling high-end vape products. So, I thought it would take a long time getting my order here. Nope, they had my order here in Oklahoma faster than some of the vape stores in the USA! Thank goodness I live in a State that isn't affected by the vape restrictions! Creme De Vape y'all are awesome, and ill be around for a while!

Just received my Squape Arise X. Quick delivery and lovely packaging. Quick 27g build and it is performing like a champ. Great flavour, smooth draw. I’m using the 1.0mm air flow. This is certainly up there with my FeVs. Filling is a doddle. No leaking. No gurgle. Yes it’s expensive but it seems to be well worth it so far.
Good throat hit. Keep up the good work Squape and CDV.