Dicodes No. 6 - Water Transfer Printed Edition
The Dicodes No.6 is a high quality regulated device packed with features and powered by the very well regarded Dicodes electronics. Capable of 60W of power and temperature control with various wire types, the firmware allows the user to select one of 4 different modes of operation, allowing the user to switch between variable watt, variable watt with heat protection, variable watt with power boost, or variable temperature. You can turn off the extended features to simplify the menu selections if you wish.
This box style mod is actually surprisingly compact for a 26650 device, and the unique curved shape is very comfortable to hold. The top and bottom sections of the device are made from stainless steel and the body is aluminium and available in a choice of various Water Transfer Printed patterns.
Menu navigation is a simple 3-button affair, easily operable with one hand. The top mounted large OLED display screen (15mmx11mm) shows all important information either while you vape, set to only display after your puff, or it can be turned off completely for a stealth mode. The variable temperature feature of this device is extremely accurate and the user can adjust for just about any temperature control capable wire type they so choose. The device can be locked and unlocked with 5 clicks and the up and down buttons can easily be locked by holding both down quickly. This is one of the easiest menu systems to use for a device with so many features.
The Dani Box is precision machined in Germany and backed by a two year warranty on the electronics*.
- 60 watts or power
- 0.05 – 5 ohm capable
- Large OLED display
- Powered by a single 26650 (not included)
- Spring-loaded center pin
- Temperature controlled vaping mode with support for various wire-types
- Optimized for dicodes resistance wire RESISTHERM (Sample included)
- Reverse battery protection
- Versatile and easy to use menu structure
- Individual user preferences selection
- 2 year warranty
- Made in Germany
- Dicodes Dani No.6 in the transfer pattern of your choice
- User guide
- Sample of Dicodes NiFe wire
- Supplied in a custom metal tin
Depth: 31mm narrowing down to 24mm
Two year warranty covers manufacturing faults within the electronic component of the device only.Opening the device, other than the battery cap to change the battery, will void the warranty.
Recommended Battery (NOT included)
Efest 26650 4200 mAh Battery
Support, discussion and tips can all be found in the dedicated Dicodes Facebook group.
Important: No tank or atomiser included. The water transfer printed pattern will remain the same but placement may vary from that shown in the photos. This device does not have an external USB port, battery must be removed and charged separately. To benefit from the temperature limit settings a coil made from NiFe, titanium or Ni200 wire is required. Standard Nichrome or Kanthal A1 may only be used in wattage mode and will not allow temperature control.