StattQualm SQuape S[even] BF RDA

The SQuape S[even] is a high-quality Swiss-made bottom fed RDA from StattQualm. 
A versatile RDA, the S[even] can be used as either a direct to lung (DL) or mouth to lung (MTL) atomiser on a squonk mod or as a standard RDA without bottom feeding (solid pin included). Air flow adustment is a simple twist of the cap and is also easily switched between MTL and DL settings. 

The risk of short-circuiting is completely eliminated by the non-conductive surface of the build deck.
 

Features

• Elegant and simple design
• Easy liquid feeding through bottom feeding
• Infinitely flexible air adjustment by turning the cap. DL and MTL separately controllable.
• Air flow from two sides. DL 2 x 4mm / MTL 2 x 1mm
• SingleCoil build deck
• Insulated against heat generation through a top cap made of PMMA (POM also incl.)
• Solid 510 pin also included for use as a dripper RDA without bottom feeding.
• Non-conductive components inside the evaporator compartment
• User-friendly build deck
• 100% Swiss Made

Materials

StattQualm attach great importance to using only the best materials. These can be found in the following list. If you have known allergies to one or more of the listed materials, we strongly advise against using them.

• Stainless steel components: stainless steel number 1.4404 / 316L
• Top cap: PMMA, POM
• Deck: aluminum ematal
• Mouthpiece and cap-stopper: POM
• O-Rings: nbr 70 shore

Kit contents

• SQuape S[even] BF RDA
• SQuip Tip N DL
• Top Cap Ring PMMA clear
• Top Cap Ring POM Black
• SQ Grip Band
• 2 x Solid 510 Screws
• Spares set
• User guide

Approximate Dimensions
Height: 20mm (excluding tip and 510 thread)
Diameter: 22mm
 

*IMPORTANT NOTES
Please note that the base of the SQuape S[even] cannot be disassembled except for the two screws and the O-rings.

As with all rebuildables, this is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style.
Return requests for any reason other than a genuine manufacturing fault will not be accepted.

Vandy Vape Mutant RDA

The Vandy Vape Mutant RDA is a project by Twisted420 in collaboration with Vandy Vape and features a totally new way of mounting dual coils in a vertical orientation. This RDA also features four different air flow options. Comes with a squonk post intalled and a tall juice port to get liquid to the top of the vertical coil wicks. This 25mm diameter RDA should pair well with most bottom fed mods or equally well for those of you who prefer to direct drip. 

Features

• Dual vertical coil design with bottom feeding (squonking) in mind
• Easy coil and wick installation
• Tall centre feed post for squonking liquid to the top of the wicks
• Side adjustable air flow with 4 different air flow options
• Excellent flavour and vapour production
• Includes an 810 resin mouthpiece and a 510 tip adapter
• Supplied with both bottom feed pin and solid pin

Dimensions
Diameter: 25mm
Height: 26mm (not including 510 thread or tip)


Kit Contents

• Fully assembled Mutant dripper with resin tip
• 810-510 drip tip adapter
• 2 x 0.39Ω fused clapton coils
• Spare parts and tools
• User guide

*IMPORTANT NOTES:
As with all rebuildables, this is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style. Please be sure you have done your research prior to purchase in order to understand what's required to build and use this device as it is not supplied with coil and wick installed. We recommend you test any coils you produce with a multi-meter before using to avoid risk of damaging your battery. Return requests for any reason other than a genuine manufacturing fault will not be accepted.

Wotofo Recurve Dual 24mm RDA

The Wotofo Recurve Dual RDA is a collaboration project with YouTube reviewer Mike Vapes and features a post-less dual coil deck (also single coil capable) with smooth air flow and a sleek, short appearance. The air flow on this RDA is directed to the base of the coil so air flows from from the bottom to the top of the coil providing maximum flavour from your juice. The kit includes a bottom fed (BF) pin so it will work nicely on a squonk mod too. 

Features

• Stainless Steel construction
• Post-less single coil deck with easy drop-in coil attachment
• Directed air flow for best flavour
• Short height for best flavour
• 24mm diameter
• BF pin included for squonking
• 810 mouthpiece

Contents

• 1 x Wotofo Recurve Dual RDA
• 1 x Fancy coloured 810 drip tip
• 1 x Spare plain curved 810 drip tip
• 1 x Coil trimming tool
• 1 x Squonk 510 pin
• 1 x User Manual
• 2 x Ni80 Quad Core Fused Clapton 0.26Ω coils
• 2 x Agleted organic cotton wicks
• 1 x bag Extra screws & orings

Approximate Dimensions
Height: 22.5mm (without tip or 510 threads)
Diameter: 24mm
 

*IMPORTANT NOTES
We advise you clean the unit and all parts fully before using to ensure no manufacturing residues remain.
As with all rebuildables, this is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style.
Return requests for any reason other than a genuine manufacturing fault will not be accepted.

UD Atomiser stand - 3 pack

The perfect companion for displaying and storing 510 style atomisers and tanks.

The UD Aluminum base provides a solid platform for coil building your RDA or RTA atomizers as well doubling up as an attractive solution for mounting your atomisers for storage and display.

Especially useful for tanks that must be kept upright when filled with e-liquid.

Anodised aluminium in a choice of colours.