Innokin Proton Device
Innokin's most advanced mod, the Proton is a huge leap forward. Dual 18650 batteries (not included) deliver 235W of power and if vaped at normal wattages will last you ages between charges. This is a rather small mod for a dual cell device. The battery door is very secure and does not fly open. The large colour dsplay screen shows all the relevant information at a glance. You have the option to change the colour of the screen as well so if you're into matching, or just like a different colour to look at this mod is ideal. Joystick control for ease of navigation in the very nicely laid out menu system. Featuring not only 235W of power this device does temperature control very well and even has custom power curves if you like to enjoy a vape exactly the way you want it - especially nice for large coils where ramp-up is needed.
NOTE: Batteries are not included with this kit and we recommend starting out with a pair or two of brand new 18650 cells and "marry" each pair together so they drain and charge at the same rate throughout their life. Any differences in the cell capacity will affect the device run-time dramatically. We recommend a pair of the EFEST IMR 18650 3000mAh batteries.
- Dual 18650 device (batteries not included)
- Large fire bar
- Joystick menu control
- Large easy to read colour screen
- 6 colour display pre-sets
- Power adjustable from 6 to 235W
- Temperature control (300-600F 150-315C)
- USB charging and firmware update port
- Custom TCR and power curves
- Innokin Proton device
- USB cable
- User Guide
- Warranty card
85mm Height, 45mm width, 30mm depth
Warranty: 60 days
IMPORTANT: To benefit from the temperature limit settings a coil made from suitable temperature controllable resistance wire is required. Standard Kanthal A1 will not allow temperature control.
Batteries NOT included.