Muted Airflow Pin set by Arcana Mods

Arcana Mods Muted Airflow Pin set

Replacement airflow pin set for the Muted RTA and Muted+ RTA by Arcana Mods.

Installation instructions

The airpins are situated under the AFC cover and can be switched without removing the coil. The engraving on the pin indicates the size.
The Muted works with one or two airpins.

MTL set

The MTL kit tightens the draw on the Muted RTA and is intended for anyone who finds the draw with the factory air pins too open. The tightest draw is achieved with just one 0.6mm pin.
7 to 15 watts recommended.

• 2 x 0.6mm airpins which corresponds to a single 0.85mm airflow
• 2 x 0.7mm airpins which corresponds to a single 0.99mm airflow

Open MTL set

The pins within the open MTL set are designed to provide a noticeably airier vape than the factory air pins.
7 to 15 watts recommended.

• 2 x 1.1mm airpins which corresponds to a single 1.56mm airflow
• 2 x 1.2mm airpins which corresponds to a single 1.70mm airflow

RDL set

The RDL set contains three pairs of air pins which transform the MTL-oriented Muted into an atomiser for a more open, yet still restricted direct lung hit. They are either used without the AFC ring, or with the optional RDL AFC Ring.
For RDL, a coil between 0.3 and 0.8ohm is recommended.

• 2 x 1.3mm airpins which corresponds to a single 1.84mm airflow
• 2 x 1.4mm airpins which corresponds to a single 1.98mm airflow
• 2 x 1.6mm airpins which corresponds to a single 2.26mm airflow

Standard set

The standard set contains exactly the airpins that come pre-installed on the Muted RTA. Handy to replace lost pins.
7 to 15 watts recommended.

• 2 x 0.8mm airpins which corresponds to a single 1.13mm airflow
• 2 x 0.9mm airpins which corresponds to a single 1.27mm airflow
• 2 x 1.0mm airpins which corresponds to a single 1.41mm airflow
• 1 x closed airpin