The original Kayfun Lite was first introduced in 2013 as the entry level Kayfun and it quickly became the benchmark RTA to which all MTL atomisers have been compared for flavour. Now in 2020 the [plus] is here with some major improvements. The new AEROKON air flow system is an innovative air flow adjustment that controls the air directly under the coil where it counts. This leads to improved performance with MTL setups, more flavour, optimised vapour saturation and it seals the 510 connector. The new Kayfun Lite [plus] is a diminutive 33mm in height, that's shorter than some drippers on the market! The build deck can be accessed with liquid in the tank and filling is much easier now that it is done through the bottom of the tank. SvoeMesto have included some nice extras, the MTL Figura clear tip, and a Dome+ tank with steel engraved beauty ring that sets it apart visually from the original Lite. The Lite [plus] is cross compatible with all accessories for the Kayfun Lite 2019.
Features
New - AEROKON air flow control
Sealed 510 connector
Air adjustment directly under the coil from 0 - 1.8mm
Includes the Dome+ tank with steel beauty ring as an extra
Includes MTL Figura clear drip tip as an extra
Super-short design
316L SS construction
Easy to build deck
Bottom filling
PEEK insulators
PSU window
2ml capacity
Small chamber size for the best possible flavour
Made in Germany
Serial number for authentication
Dimensions
Diameter: 22mm
Length: 33mm (not including 510 thread or tip)
Capacity: 2ml
Kit Contents
Kayfun Lite [plus] 22mm with PSU window
MTL Figura drip tip clear
Dome+ tank with beauty ring
Chimney extension
Full spares pack
User guide
Please note the coil screws do NOT come pre-installed on the deck. There are two sets included in the spares pack in the kit.
*IMPORTANT NOTES:
As with all rebuildables, this is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style. Please be sure you have done your research prior to purchase in order to understand what's required to build and use this device as it is not supplied with coil and wick installed. We recommend you test any coils you produce with a multi-meter before using to avoid risk of damaging your battery. Return requests for any reason other than a genuine manufacturing fault will not be accepted.
Additional product information
Vaping Style
MTL (Mouth-to-lung)
Tank Width
22mm
Customer ratings for Svoemesto Kayfun Lite [plus] - 22mm
This is my second kayfun lite plus 22. Bought another because the machining quality and vape experience is flawless.
Unfortunately there was a problem with this second one. Specifically the airflow which had missed a pass and was missing a bevel on the airhole, which caused a harsh almost whistly sound. This is something I probably wouldn't have noticed did I not already have one to compare to. Creme De Vape and SvoeMesto were both amazing. CDV arranged for SM (who were very apologetic) to directly send me a replacement part. No hassle of having to return and replace. Couldn't be happier with the service from both. It's always good to know that when bleep happens, you will be taken care of.
As for the tank itself, I only have one real complaint. It can be very difficult to unscrew the deck for filling. A few times I have accidentally unscrewed the tank apart trying to get the deck off. There are some cutouts on the deck to aid grip, but I think it needed more.
Everything else is positive. The airkon pin airflow adjustment works very well. It's great to be able to dial in exactly how you like it, not restrained by presets of 0.8, 1.0, 1.2 etc. It seems I like what is roughly 1.1mm, something normally unachievable. The only downside to it, is it means the 510 pin is quite hollow. I have come across a mod who's 510 pin is small enough that it goes inside the attys 510 and doesn't make connection. Just something to be aware of. Most mods are fine. Bottom fill doesn't bother me at all (aside from the mentioned difficulty unscrewing) because it's MTL so you're not filling often. The included clear tank and driptip turn it into what to me is the most beautiful atomiser I have ever owned. So clean and elegant. Being able to rotate the metal part so the logo lines up with your mod is a great touch. I don't notice any decrease in flavour from the slightly extended chimney and the extra capacity is a nice bonus.
Overall it is the best MTL experience I have ever had. Being initially unsure whether it was worth the price compared to a cheaper MTL RTA like the dead rabbit, I am so glad I decided to get it. All other MTL attys have been retired. The hype is real, kayfun is king of MTL!
Worth buying. from Anonymous on 13/09/2024
I vape MTL exclusively, so I wanted to acquire what is generally considered a top tier MTL RTA. So far, I haven't been disappointed.
Pros: -No leaking, so far -Practically silent. No strange sounds on the inhale. -Excellent air-flow control. I can dial it to just the right tightness. -Top quality machining -The 22mm is compact. Fits on just about everything. I love the size.
Cons: -Don't love upside down filling, although I believe this has something to do with why the Kayfun does not leak -Sometimes the bottom can get too tight. The smoothness of the metal makes it difficult to unscrew in order to fill. I have accidentally unscrewed the PSU window trying to open it.
Overall great atomizer. I have not yet tried the higher capacity dome tank so I can't comment on that. I understand that there is an aftermarket Kayfun top-fill accessory which I might try. Even without that I would definitely buy again. Highly recommended.
The best mtl rta from James Hepburn on 20/07/2023
excellent rta for mtl, super smooth airflow. excellent service from creme de vape, very well packaged,I ordered at 4pm and package arived a 12.30pm the next day
All incoming ratings are posted by actual shop visitors / webshop customers and their content is checked by the operator by means of a visual inspection.