Aspire Skystar 210W touch-screen box mod
Following on from the success of the Speeder, Aspire now bring you an even more powerful dual battery device - the SkyStar.
The SkyStar is a dual 18650 battery 210 watt mod with a 1.3 inch touch screen with every function you have come to expect from Aspire. Wattage/Voltage/BYPASS/TC(Ni,Ti,SS,M1,M2,M3) and CPS (Customizable Power Settings). The sensuous curves make it very ergonomic in the hand and easy to operate all the functions - it's an absolute joy to hold.
Battery installation is almost foolproof, with an easy to open though very secure magnetic back plate, inside there are clearly marked battery orientation markings (+ and -) and of course a securely mounted battery removal tape. When inserting fresh batteries, turn off the mod. Open the back panel by inserting a fingernail into the slot at the bottom and pull off the battery cover.
The touch screen is responsive and just takes a few taps or swipes UP, DOWN or RIGHT to allow you to select the output modes and access all of the other functions of the mod, such as modes, data, system, time, and about, the last of which allows you to view the firmware version and also gives a QR code, which you can scan to access the Aspire website for more information.
The SkyStar can also be charged via the Micro-USB port. When charging the screen will display 2 flashing battery icons, voltage level, charge current as well as charge time. The charging port can also be used to update the firmware
NOTE: Batteries are not included with this kit and we recommend starting out with a pair or two of brand new 18650 cells and "marry" each pair together so they drain and charge at the same rate throughout their life. Any differences in the cell capacity will affect the device run-time dramatically. We recommend a pair of the EFEST IMR 18650 3000mAh or Sony VTC5A 2500mAh.
- Compact ergonomic dual 18650 device (batteries not included)
- Large touch screen controls
- 210W or power adjustable from 1 to 210W
- Temperature control
- USB charging and firmware update port
- Custom TCR and power curves available
- SkyStar mod
- USB cable
- Warning card
- User manual
- Warranty card
Warranty: 60 days
IMPORTANT: To benefit from the temperature limit settings a coil made from suitable temperature controllable resistance wire is required. Standard Kanthal A1 will not allow temperature control.
Tank and batteries NOT included.