Skystar/Revvo kit by Aspire


Skystar/Revvo kit by Aspire

Product no.: ASP-SKYSTAR-KIT

+ P&P if applicable



Aspire Skystar 210W touch-screen mod and Revvo tank kit


Kit including the powerful SkyStar 220W device and the innovative Revvo subtank. 

The SkyStar is a dual 18650 battery 210 watt mod with a 1.3 inch touch screen with every function you have come to expect from Aspire. Wattage/Voltage/BYPASS/TC(Ni,Ti,SS,M1,M2,M3) and CPS (Customizable Power Settings). The sensuous curves make it very ergonomic in the hand and easy to operate all the functions - it's an absolute joy to hold.

Battery installation is almost foolproof, with an easy to open though very secure magnetic back plate, inside there are clearly marked battery orientation markings (+ and -) and of course a securely mounted battery removal tape. When inserting fresh batteries, turn off the mod. Open the back panel by inserting a fingernail into the slot at the bottom and pull off the battery cover.

The touch screen is responsive and just takes a few taps or swipes UP, DOWN or RIGHT to allow you to select the output modes and access all of the other functions of the mod, such as modes, data, system, time, and about, the last of which allows you to view the firmware version and also gives a QR code, which you can scan to access the Aspire website for more information.



The SkyStar can also be charged via the Micro-USB port. When charging the screen will display 2 flashing battery icons, voltage level, charge current as well as charge time. The charging port can also be used to update the firmware

NOTE: Batteries are not included with this kit and we recommend starting out with a pair or two of brand new 18650 cells and "marry" each pair together so they drain and charge at the same rate throughout their life. Any differences in the cell capacity will affect the device run-time dramatically. We recommend a pair of the EFEST IMR 18650 3000mAh or Sony VTC5A 2500mAh.


Skystar Features:

  •     Compact ergonomic dual 18650 device (batteries not included)
  •     Large touch screen display screen with controls
  •     210W or power adjustable from 1 to 210W
  •     Temperature control
  •     USB charging and firmware update port
  •     Custom TCR and power curves available


This kit includes the all new Aspire Revvo tank, a truly new design with an innovative new type of coil, the ARC 'Aspire Radial Coil'. This 24mm tank has an adjustable top airflow construction and a special spring loaded filling tube. The all new coil design sits horizontally in the tank similar to a 'stove-top' design. Of course the real trick in the design is the increased surface area of the coil for great flavour and great vapour production. The Kanthal AF coil is rated between 0.10 & 0.16Ω (Recommended wattage 50-100W). (Manufacturing tolerance for the coil surface is 0.06Ω due to the way they are pressed.)


Filling the Revvo tank is another of Aspire's innovative designs, and it couldn't be simpler. In the centre of the tank, accessible directly through the mouthpiece, sits a spring loaded filling tube. The spring of the tube is soft enough to allow even slight pressure from almost any type of bottle/glass dropper to open it, but strong enough to create a leak-proof seal when released after filling.


Fitting or replacing the Aspire ARC coil is very easy. Simply unscrew the mouthpiece/top-cap and the coil mounting screw, remove the used coil and drop the new coil over the filling tube, ensuring that it sits flush with the body of the tank around all sides. Then screw the coil mounting screw and the mouthpiece/top-cap back on and that's it. The coil can even be changed with e-liquid still in the tank. As an added function, the conical coil mounting screw also acts as a spit-back protector.

Included with the kit is a protective silicone cap. Simply close the airflow slots and to use the protective cap when travelling or when the tank is not in use to avoid leakage and prevent dust and dirt from entering the top chamber. It is also advisable to use the cap when carrying on a plane as the cabin pressure can adversely affect the pressure inside the tank and cause leaking. We think it's nice that Aspire thought of this little detail. 

Package includes:

  • Aspire Skystar box mod
  • Aspire Revvo tank  
  • 2 X Coils (Rated between 0.10 & 0.16ohm)  
  • 1 X Glass tube  
  • 10 X O-rings  
  • 1 X Protective silicone cap
  • Warning card
  • User manual  
  • Warranty card

Compatible parts (available separately)
Aspire Revvo ARC Coils - 3pk
Aspire Revvo subtank
Skystar 210W touch-screen box mod


Approximate dimensions
Skystar box mod: 91mm Height, 33mm width, 50mm depth
Revvo tank: 24mm wide, 41mm long including tip and thread

Warranty: 60 days

IMPORTANT: To benefit from the temperature limit settings a coil made from suitable temperature controllable resistance wire is required. Standard Kanthal A1 will not allow temperature control.
Batteries NOT included.


Additional product information

Safety Information Download


Product Note Status Price
Pair of Efest IMR18650 batteries in case Pair of Efest IMR18650 batteries in case
£17.95 *
Sony VTC5A 2500mAh Battery Sony VTC5A 2500mAh Battery
£9.95 *
XTAR VC2 Charger XTAR VC2 Charger
£14.95 *

+ P&P if applicable

Display accessory details

We also recommend

Aspire Revvo subtank
from £26.95 *
Aspire Athos subtank
from £28.95 *

+ P&P if applicable

Customers who bought this product also bought


+ P&P if applicable

Browse these categories as well: Aspire, Just Arrived, Creme de Vape electronic cigarettes, eliquid and vaper's supplies - Home, Device & Tank Kits