Dicodes Dani Box Stabilised wood Edition (V3)
The Dicodes Dani Box is a high quality regulated device packed with features and powered by the very well regarded Dicodes electronics. Capable of 80W of power and temperature control with various wire types, the firmware allows the user to select one of 4 different modes of operation, allowing the user to switch between variable watt, variable watt with heat protection, variable watt with power boost, or variable temperature. You can turn off the extended features to simplify the menu selections if you wish.
This 18650 size box style mod is quite compact and the unique curved shape is very comfortable to hold. The top and bottom sections of the device are made from a brushed stainless steel and the body on this special edition is a beautiful stabilised wood. The V3 version also takes on the larger size display similar to the 21700 and No6 devices.
Navigating the menu interface is surprisingly simple with three buttons and can be operated to change settings easily with one hand. The top mounted OLED display screen shows all important information either while you vape, set to only display after your puff, or it can be turned off completely for a stealth mode. The variable temperature feature of this device is extremely accurate and the user can adjust for just about any temperature control capable wire type they so choose. The device can be locked and unlocked with 5 clicks and the up and down buttons can also be locked by holding them both down at once. This is one of the easiest menu systems to use for a device with so many features.
This device does not have an external USB port, battery must be removed and charged separately, OR available separately is the Dicodes CS1 Charging Station (Charger inserts for this device to be available early 2020)
The Dani Box is precision machined in Germany and backed by a two year warranty on the electronics*.
- 80 watts or power
- 0.05 – 5 ohm capable
- Large OLED display
- Brushed SS finish on top and bottom caps
- Powered by a single 18650 (not included)
- Spring-loaded center pin
- Temperature controlled vaping mode with support for various wire-types
- Optimized for dicodes resistance wire RESISTHERM (Sample included)
- Reverse battery protection
- Versatile and easy to use menu structure
- Individual user preferences selection
- 2 year warranty
- Made in Germany
- Dicodes Dani Box mod in the wood of your choice
- User guide
- Sample of Dicodes NiFe wire
- Supplied in a custom wood box
Two year warranty covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty.
Recommended Battery (NOT included)
Sony VTC5A 2500mAh Battery
Sony VTC6 18650 3000mAh Battery
Support, discussion and tips can all be found in the dedicated Dicodes Facebook group.
Important: No tank or atomiser included. This device does not have an external USB port, battery must be removed and charged separately. To benefit from the temperature limit settings a coil made from NiFe, titanium or Ni200 wire is required. Standard Nichrome or Kanthal A1 may only be used in wattage mode and will not allow temperature control. Flat top 18650 battery required.
This product cannot be sent by Standard Royal Mail First Class post.