Wismec Sinuous V80 / Amor NSE Tank Kit

The Wismec Sinuous V80 with Amor NSE tank kit is a very compact light-weight single 18650 device. Featuring a full featured chip with temp control and memory functions and a replaceable cell the Sinuous V80 is the perfect pocket friendly all day device for those looking for an affordable mod with an easy to use tank. The device is constructed of polycarbonate materials to keep both the weight and the cost down to a minimum. 

The included Wismec Amor NSE tank is a simple tank featuring easy-to-use top fill suitable for both a direct lung vape (using the 0.27Ω mesh head) or a mouth to lung style vape (with the 1.3Ω head). 

Firmware updates are available via www.wismec.com/software
 

Features:

• 80W max power
• VW, TC (Ni, Ti, SS) 
• Compact and light weight device
• Amor NSE Tank with sliding top fill
• MTL and DL capable 
• USB charging or replace the cell

Dimensions (approx)
Sinuous V80 device: Width: 27mm  Length: 81mm
Amor NSE Tank: Diameter 26mm Length 46mm

 

To charge
It is advised to recharge your cells in an external charger, but you can also plug the USB cable into the port on the side of the device, and connect to an approved USB wall adapter, or other USB power source. 

 

IMPORTANT: 
To benefit from the temperature limit settings a coil made from suitable temperature controllable resistance wire is required. Standard Nichrome or Kanthal A1 will not allow temperature control.
60 day warranty on body and the main board. Tanks and heads are sold as disposable items and we are only able to offer a D.O.A. Warranty on them. 
If you use the sub-ohm head in this tank you must make sure the battery device you are using is fully capable of safely supporting the required drain rate. We will not accept any responsibility for any damage caused by sub-ohming activity. 
Please see our Terms & Conditions for full warranty information and exclusions.