Wotofo Profile V1.5 Mesh RDA

Product no.: WOTOFO-PROF1.5



Wotofo Profile V1.5 Mesh RDA

The Wotofo Profile V1.5 Mesh RDA is a updated design by Wotofo and #Mrjustright1 with a new deck design that increases the surface area of the mesh strip for even better flavour than the original. The juice wells are also deeper and larger so getting that cotton in there should be much easier on this version. The spring loaded ceramic piece under the cotton wick helps keep the wick pressed against the underside of the mesh heating element thereby reducing the chance of a hot spot and foul tasting juice. Also part of the update is that the ceramic spring-loaded cotton holder has grooves cut into it so your squonking can find its way to the places it's needed in the deck to keep your wick saturated. The air flow on this RDA is buttery smooth and produces excellent flavour and big clouds and can be adjusted for either a warm experience or cooler wide open.

The V1.5 updated design started with the mesh itself. Included in this kit you'll get three new nexMESH strips, Chill is a smooth and mellow experience, Turbo is a more bold vape, and the Extreme is robust and warm experience. Please note these new mesh strips are not compatible with the previous Profile or Unity atomisers due to the fact they have a much larger surface area. 

The Profile ships with the BF hollow 510 post installed so be sure to swap that out if you do not plan to use this on a bottom fed mod.


  • Clamp style deck
  • Mesh coil, or regular single coil capable
  • Innovative spring-loaded cotton retaining system 
  • 2 mouthpieces supplied
  • Bottom Feed (BF) pin pre-installed for squonking
  • Smooth adjustable airflow
  • 24mm diameter


  • Wotofo Profile V1.5  mesh RDA in the colour of your choice
  • 3 x 6mm Agleted Cotton "Xfiber" Strips
  • 1 x nexMESH Chill Kanthal A1 0.15Ω
  • 1 x nexMESH Tubro Kanthal A1 0.13Ω
  • 1 x nexMESH Extreme Kanthal A1 0.16Ω 
  • 1 x Standard 810 wide bore mouthpiece
  • 1 x Spare 810 mouthpiece with slanted design
  • 1 x Coil jig / mesh bending tool
  • 1 x Allen key tool
  • 1 x Screwdriver
  • 1 x Spares bag with o-rings, screws, and 2 springs
  • 1 x User guide


All air holes open, upper line of air holes directing air to the top of the arched mesh and lower line directing air to the sides, forming a strong vapour stream, thus producing thick clouds with rich flavour.

Upper line of air holes closed and lower line open, directing air to the sides of the mesh, then vaporised air gathering at the centre and travelling up, producing warmer vapour.

When you turn the top cap to adjust airflow, the setting goes like this: Max -> Lower -> Closed -> Flexible. The flexible option can set the airflow from minimum air holes to maximum horizontally.

810 style drip tip featuring a very wide upper bore, making direct dripping super easy. An extra drip tip is provided in the package which is shorter and features a nice angular shape.

Approximate Dimensions
Height: 22mm (excluding 510 connector)
Diameter: 24mm


We advise you clean the unit and all parts fully before using to ensure no manufacturing residues remain.
As with all rebuildables, the Profile is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style.
Return requests for any reason other than a genuine manufacturing fault will not be accepted.


Additional product information

Vaping Style
  • DL (Direct lung)


Product Note Status Price
Wotofo nexMESH coils for Profile V1.5 Wotofo nexMESH coils for Profile V1.5
Wotofo Agleted cotton wick - 10pk - 6mm (Xfiber) Wotofo Agleted cotton wick - 10pk - 6mm (Xfiber)
(Wick Type: 6mm)
Display accessory details

We also recommend

Customers who bought this product also bought

Browse these categories as well: Rebuildables, Drippers (RDAs), BF / Squonker RDAs