Svoemesto Kayfun Lite [plus] - 24mm

The original Kayfun Lite was first introduced in 2013 as the entry level Kayfun and it quickly became the benchmark RTA to which all MTL atomisers have been compared for flavour. Now in 2020 the [plus] is here with some major improvements. The new AEROKON air flow system is an innovative air flow adjustment that controls the air directly under the coil where it counts. This leads to improved performance with MTL setups, more flavour, optimised vapour saturation and it seals the 510 connector. The new Kayfun Lite [plus] is a diminutive 33mm in height, that's shorter than some drippers on the market! The build deck can be accessed with liquid in the tank and filling is much easier now that it is done through the bottom of the tank. SvoeMesto have included some nice extras, the MTL Figura clear tip, and a Dome+ tank with steel engraved beauty ring that sets it apart visually from the original Lite. The Lite [plus] is cross compatible with all accessories for the Kayfun Lite 2019.

Features

• New - AEROKON air flow control
• Sealed 510 connector
• Air adjustment directly under the coil from 0 - 1.8mm
• Includes the Dome+ tank with steel beauty ring as an extra
• Includes MTL Figura clear drip tip as an extra
• Super-short design
• 316L SS construction
• Easy to build deck
• Bottom filling
• PEEK insulators
• PSU window
• Small chamber size for the best possible flavour
• Made in Germany
• Serial number for authentication

Dimensions
Diameter: 22mm
Length: 33mm (not including 510 thread or tip)


Kit Contents

• Kayfun Lite [plus] 24mm with PSU window
• MTL Figura drip tip clear
• Dome+ tank with beauty ring
• Chimney extension
• Full spares pack
• User guide

Please note the coil screws do NOT come pre-installed on the deck. There are two sets included in the spares pack in the kit.
 

Support, discussion and tips can all be found in our dedicated SvoeMesto Facebook group.

*IMPORTANT NOTES:
As with all rebuildables, this is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style. Please be sure you have done your research prior to purchase in order to understand what's required to build and use this device as it is not supplied with coil and wick installed. We recommend you test any coils you produce with a multi-meter before using to avoid risk of damaging your battery. Return requests for any reason other than a genuine manufacturing fault will not be accepted.