Svoemesto Kayfun X SE Deep Black DLC - 24mm

The original Kayfun was first introduced in 2012 and it quickly became the benchmark RTA to which all MTL atomisers have been compared for flavour. Ten years on, and the Kayfun X is the culmination of several design iterations and feature refinements. We are proud to have partnered with SvoeMesto throughout this journey and think this design has ticked a lot of boxes.

The AEROKON air flow system is an innovative air flow adjustment that controls the air directly under the coil where it counts. This leads to improved performance with MTL setups, more flavour, optimised vapour saturation and it seals the 510 connector and the build deck can still be accessed with liquid in the tank.

Filling is also made much easier with this design as you simply pull up on the top cap to release the slide locking to reveal the fill port and close the liquid control in one motion. The X engraving on the top cap is an indicator of where to push to slide the cap open for refilling. This can be rotated to your desired position so you can line things up with your mod - especially useful on SBS style devices. 

Sometimes the simplest designs are the most effective. 

Features

• Deep Black DLC finish
• AEROKON air flow control
• Sealed 510 connector
• Air adjustment directly under the coil from 0 - 1.8mm
• Super-short design
• 316L SS construction
• Easy to build deck
• Top filling
• PEEK insulators
• PSU window
• Small chamber size for the best possible flavour
• Made in Germany
• Serial number for authentication

Dimensions
Diameter: 24mm
Length: 42.5mm (not including 510 thread or tip)


Kit Contents

• Kayfun X SE Deep Black DLC with PSU window and matching drip tip
• Full spares pack
• User guide

Support, discussion and tips can all be found in our dedicated SvoeMesto Facebook group.

*IMPORTANT NOTES:
As with all rebuildables, this is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style. Please be sure you have done your research prior to purchase in order to understand what's required to build and use this device as it is not supplied with coil and wick installed. We recommend you test any coils you produce with a multi-meter before using to avoid risk of damaging your battery. Return requests for any reason other than a genuine manufacturing fault will not be accepted.

Svoemesto Kayfun Lite [plus] - 24mm

The original Kayfun Lite was first introduced in 2013 as the entry level Kayfun and it quickly became the benchmark RTA to which all MTL atomisers have been compared for flavour. Now in 2020 the [plus] is here with some major improvements. The new AEROKON air flow system is an innovative air flow adjustment that controls the air directly under the coil where it counts. This leads to improved performance with MTL setups, more flavour, optimised vapour saturation and it seals the 510 connector. The new Kayfun Lite [plus] is a diminutive 33mm in height, that's shorter than some drippers on the market! The build deck can be accessed with liquid in the tank and filling is much easier now that it is done through the bottom of the tank. SvoeMesto have included some nice extras, the MTL Figura clear tip, and a Dome+ tank with steel engraved beauty ring that sets it apart visually from the original Lite. The Lite [plus] is cross compatible with all accessories for the Kayfun Lite 2019.

Features

• New - AEROKON air flow control
• Sealed 510 connector
• Air adjustment directly under the coil from 0 - 1.8mm
• Includes the Dome+ tank with steel beauty ring as an extra
• Includes MTL Figura clear drip tip as an extra
• Super-short design
• 316L SS construction
• Easy to build deck
• Bottom filling
• PEEK insulators
• PSU window
• Small chamber size for the best possible flavour
• Made in Germany
• Serial number for authentication

Dimensions
Diameter: 22mm
Length: 33mm (not including 510 thread or tip)


Kit Contents

• Kayfun Lite [plus] 24mm with PSU window
• MTL Figura drip tip clear
• Dome+ tank with beauty ring
• Chimney extension
• Full spares pack
• User guide

Please note the coil screws do NOT come pre-installed on the deck. There are two sets included in the spares pack in the kit.
 

Support, discussion and tips can all be found in our dedicated SvoeMesto Facebook group.

*IMPORTANT NOTES:
As with all rebuildables, this is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style. Please be sure you have done your research prior to purchase in order to understand what's required to build and use this device as it is not supplied with coil and wick installed. We recommend you test any coils you produce with a multi-meter before using to avoid risk of damaging your battery. Return requests for any reason other than a genuine manufacturing fault will not be accepted.

Svoemesto Kayfun Lite [plus] SE Nite DLC - 22mm

The original Kayfun Lite was first introduced in 2013 as the entry level Kayfun and it quickly became the benchmark RTA to which all MTL atomisers have been compared for flavour. Now in 2020 the [plus] is here with some major improvements. The new AEROKON air flow system is an innovative air flow adjustment that controls the air directly under the coil where it counts. This leads to improved performance with MTL setups, more flavour, optimised vapour saturation and it seals the 510 connector. The new Kayfun Lite [plus] is a diminutive 33mm in height, that's shorter than some drippers on the market! The build deck can be accessed with liquid in the tank and filling is much easier now that it is done through the bottom of the tank. SvoeMesto have included some nice extras, the MTL Figura clear tip, and a Dome+ tank with steel engraved beauty ring that sets it apart visually from the original Lite. The Lite [plus] is cross compatible with all accessories for the Kayfun Lite 2019.

Features

• Black DLC Coating
• New - AEROKON air flow control
• Sealed 510 connector
• Air adjustment directly under the coil from 0 - 1.8mm
• Black DLC matching steel drip tip
• Includes the Dome+ tank with matching DLC steel beauty ring as an extra
• Includes MTL Figura clear drip tip as an extra
• Super-short design
• 316L SS construction
• Easy to build deck
• Bottom filling
• PEEK insulators
• PSU window
• 2ml capacity
• Small chamber size for the best possible flavour
• Made in Germany
• Serial number for authentication

Dimensions
Diameter: 22mm
Length: 33mm (not including 510 thread or tip)
Capacity: 2ml

Kit Contents

• Kayfun Lite [plus] SE Nite DLS 22mm with PSU window and matching steel drip tip
• MTL Figura drip tip clear
• Dome+ tank with DLC beauty ring
• Chimney extension
• Full spares pack
• User guide

Please note the coil screws do NOT come pre-installed on the deck. There are two sets included in the spares pack in the kit.
 

Support, discussion and tips can all be found in our dedicated SvoeMesto Facebook group.

*IMPORTANT NOTES:
As with all rebuildables, this is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style. Please be sure you have done your research prior to purchase in order to understand what's required to build and use this device as it is not supplied with coil and wick installed. We recommend you test any coils you produce with a multi-meter before using to avoid risk of damaging your battery. Return requests for any reason other than a genuine manufacturing fault will not be accepted.

Svoemesto Kayfun Lite [plus] SE Nite DLC - 24mm

The original Kayfun Lite was first introduced in 2013 as the entry level Kayfun and it quickly became the benchmark RTA to which all MTL atomisers have been compared for flavour. Now in 2020 the [plus] is here with some major improvements. The new AEROKON air flow system is an innovative air flow adjustment that controls the air directly under the coil where it counts. This leads to improved performance with MTL setups, more flavour, optimised vapour saturation and it seals the 510 connector. The new Kayfun Lite [plus] is a diminutive 33mm in height, that's shorter than some drippers on the market! The build deck can be accessed with liquid in the tank and filling is much easier now that it is done through the bottom of the tank. SvoeMesto have included some nice extras, the MTL Figura clear tip, and a Dome+ tank with steel engraved beauty ring that sets it apart visually from the original Lite. The Lite [plus] is cross compatible with all accessories for the Kayfun Lite 2019.

Features

• Black DLC Coating
• New - AEROKON air flow control
• Sealed 510 connector
• Air adjustment directly under the coil from 0 - 1.8mm
• Black DLC matching steel drip tip
• Includes the Dome+ tank with matching DLC steel beauty ring as an extra
• Includes MTL Figura clear drip tip as an extra
• Super-short design
• 316L SS construction
• Easy to build deck
• Bottom filling
• PEEK insulators
• PSU window
• Small chamber size for the best possible flavour
• Made in Germany
• Serial number for authentication

Dimensions
Diameter: 24mm
Length: 33mm (not including 510 thread or tip)


Kit Contents

• Kayfun Lite [plus] SE Nite DLS 24mm with PSU window and matching steel drip tip
• MTL Figura drip tip clear
• Dome+ tank with DLC beauty ring
• Chimney extension
• Full spares pack
• User guide

Please note the coil screws do NOT come pre-installed on the deck. There are two sets included in the spares pack in the kit.
 

Support, discussion and tips can all be found in our dedicated SvoeMesto Facebook group.

*IMPORTANT NOTES:
As with all rebuildables, this is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style. Please be sure you have done your research prior to purchase in order to understand what's required to build and use this device as it is not supplied with coil and wick installed. We recommend you test any coils you produce with a multi-meter before using to avoid risk of damaging your battery. Return requests for any reason other than a genuine manufacturing fault will not be accepted.

Svoemesto Kayfun [Lite] High Noon Edition - 24mm

The Kayfun Lite was first introduced in 2013 as the entry level Kayfun and it quickly became the benchmark RTA to which all MTL atomisers have been compared for flavour. Now in 2019 it's back and greatly improved to incorporate the new style build deck from the Prime that's not only easier to build than the original Lite, but greatly reduces the overall height of the tank. The new Kayfun [Lite] is a diminutive 33mm in height, that's shorter than some drippers on the market! The build deck can be accessed with liquid in the tank and filling is much easier now that it is done through the bottom of the tank instead of a small hole under the base. Air flow is adjustable with a grub screw hidden inside the 510 post.

Features

• Gold plated brushed version
• Super-short design
• 316L SS construction
• Easy to build deck
• Bottom filling
• PEEK insulators
• PEI (Ultem viewing window)
• 3.5ml capacity
• Step-less adjustable air flow from 0 - 1.8mm
• Small chamber size for the best possible flavour
• Made in Germany
• Serial number for authentication

Dimensions
Diameter: 24mm
Length: 33mm (not including 510 thread or tip)
Capacity: 3.5ml

Kit Contents

• Kayfun [Lite] High Noon Edition - 24mm with Ultem window
• Full spares pack
• User guide

Please note the coil screws do NOT come pre-installed on the deck. There are two sets included in the spares pack in the kit.
 

Support, discussion and tips can all be found in our dedicated SvoeMesto Facebook group.

*IMPORTANT NOTES:
As with all rebuildables, this is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style. Please be sure you have done your research prior to purchase in order to understand what's required to build and use this device as it is not supplied with coil and wick installed. We recommend you test any coils you produce with a multi-meter before using to avoid risk of damaging your battery. Return requests for any reason other than a genuine manufacturing fault will not be accepted.
 

Message from manufacturer:
Disclaimer: Finished and coated surfaces are scratch-sensitive and therefore not included in the warranty. Please, handle with care.
The blasted versions may have different levels of brightness depending on the light irradiation.
As a result, the brightness of the product may differ from the product image shown here.

Svoemesto Kayfun Prime SE Dark Silk DLC

The Kayfun Prime is a high quality "mouth to lung" style tank manufactured in Germany by SvoeMesto. Going back to their roots, the team at SvoeMesto have designed this RTA to deliver a premium and original Kayfun experience with a smooth air flow adjustable in six steps from 1mm to 2mm to provide a rich dense vapour. The chamber size is reduced to concentrate the flavour of your favourite e-liquids. Inherited from the current series of Kayfuns is the convenient airflow adjustment ring, and liquid control mechanism. Top-fill is made super-simple and the fill port area has been redesigned to help prevent spillage from overfilling the tank.

This Dark Silk DLC finish matches perfectly the Dicodes Dani Box Mini Darlk Silk DLC. 

Features

• Dark Silk DLC finish
• Top fill design
• Liquid control (fully adjustable)
• PEEK insulators
• 316L stainless steel
• Ultem viewing window
• Six step external adjustable air flow from 1mm - 2mm
• Small chamber size for the best possible flavour
• Serial number for authentication

Dimensions
Diameter: 22mm
Length: 45.5mm (not including 510 thread or tip)


Kit Contents

• Fully assembled Dark Silk DLC Kayfun Prime with engraved steel tank
• Full spares pack
• User guide

Support, discussion and tips can all be found in our dedicated SvoeMesto Facebook group.

*IMPORTANT NOTES:
As with all rebuildables, a Kayfun series atomiser is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style. Please be sure you have done your research prior to purchase in order to understand what's required to build and use this device as it is not supplied with coil and wick installed. We recommend you test any coils you produce with a multi-meter before using to avoid risk of damaging your battery. Return requests for any reason other than a genuine manufacturing fault will not be accepted.