StattQualm SQuape SQuape N[duro] Nano Kit (Steel)

Nano kit with 2ml capacity and topfill capability for the StattQualm SQuape N[duro] Atomiser.

This is the full stainless version with no viewing window. Also available is the Nano kit with viewing window.

StattQualm SQuape S[even] Top cap ring

Top cap ring to give your StattQualm SQuape S[even] RDA an individual look and perhaps to match or contrast with your device.

One top cap ring supplied in the material of your choice:

• PMMA clear
• POM Black
• Stainless Steel
• Ultem Black
• Ultem Natural

Outer Diameter: 22mm

StattQualm SQuape E[motion] Spares Kit 

Essential spares kit for the SQuape E[motion] ot the SQuape E[c] by StattQualm. Includes orings and spare screws for the coil attachment posts.

O-rings: 
1x ø 18x1.5 
3x ø 17x1 
2x ø 2.5x1 
1x ø 7x1.5 
1x ø 15x1 

Screws: 
2x cross slot M2x4

StattQualm SQuape E[motion] - Ematal Deck

Replacement Ematal coated deck with three differently shaped wick channels.

Compatible with the following:
SQuape E[motion]
SQuape E[motion] full colour edition
SQuape E[c]
 

• Be - Single coil (Included with the SQuape E[c])
• De - Dual coil - (Please note this deck does not accept the MTL adapter)
• We - Wide - (Included with the SQuape E[motion])

StattQualm SQuape A[rise] Top Cap

Replacement top cap for the StattQualm SQuape A[rise] Atomiser.

StattQualm SQuape E MTL Kit 

MTL adapter kit for the SQuape E[motion] or the SQuape E[c] by StattQualm.

Screws into the underside of the deck, requires the use of a 2.5mm allen key tool to install.

Please note the De (Dual coil) deck does not accept the MTL adapters.

Set of 3
1x 1.3mm
1x 2.0mm
1x 2.5mm

StattQualm SQuape X,E,N Centre Post 

Spare gold plated 510 centre pin for the following:

SQuape N[duro]
SQuape E[c] 
SQuape E[motion]
SQuape X[s]

Tube and switch set by Limelight Mechanics

Add some flair to your Limelight device with these cerakote tube and switch packs. Available in several colours and easily swapped out so you can quickly change the look of your device.

This item includes two different switches (one is compatible with the Wicket, and one is compatible with the Wicket Mono).

Compatible devices

• Limelight Wicket
• Limelight Wicket Mono
• Limelight Freehand M
• Limelight SBS 

Svoemesto Kayfun [Lite] XS Centre pin 

The XS centre post is an optional performance accessory for the Kayfun [Lite] 2019 atomiser.

Designed for optimisation of setups that require an extremely tight draw.
Maximum Airflow: 1.2mm

Contains 2 AFC grub screws. 

Note: This item is NOT compatible with the Kayfun [Lite] Plus

Eleaf ELLO HW Series heads - 5pk

Pack of 5 x replacement heads for the following tanks and kits:

Eleaf ELLO tank
iStick Pico 25 and ELLO tank kit by Eleaf
Invoke and ELLO T kit by Eleaf

Choice of coils:
HW1 - Single stainless - 0.2Ω (40-80W)
HW2 - Dual kanthal - 0.3Ω (30-70W)
HW3& - Triple kanthal - 0.2Ω (50-130W)
HW4 - Quad kanthal - 0.3Ω (40-110W)
HW-M - Multihole kanthal - 0.15Ω (70-80W)
HW-N - Net kanthal - 0.2Ω (65-750W)

Important
Atomiser heads are disposable consumable parts and as such, are covered by our DOA warranty only. See our Terms & Conditions for more information.
These are sub-ohm heads and you must make sure the battery/device you are using is fully capable of safely supporting the required drain rate. We strongly recommend you thoroughly research the topic before embarking on any experiments with sub-ohming. We will not accept any responsibility for any damage caused by sub-ohming activity.

Wire rods by Crème de Vape

12cm lengths of twisted wire in a handy tube. These specialised wires should take your rebuildable atomiser to the next level.
Specialist wires can be ruined when wound up on a reel, so we've sourced these rods so that the fancy twisting is preserved right up till you come to make your coil.

Choose from the following types:

• Tiger wire - Nh32g*1.2+K24g - 10pcs
• Ni200 Clapton Wire - Ni32g+Ni26g - 30pcs
• Fused Clapton Wire - K32g + K26g*2 - 30pcs

Standard Silica Wick - 5m 

Approximately 5 metre length of Standard Silica Wick for rebuildable atomiser coils.
Available in two widths.

Nickel (Ni200) Wire - 10m

10 metre reel of Ni200 Nickel wire for building coils strictly for use on a device that supports temperature sensing mode.

Available in  0.3mm and 0.4mm 

Nichrome Resistance Wire 

Wire for rebuildable atomiser coils.

Nichrome 0.15mm / 35ga
Nichrome 0.16mm / 34ga
Nichrome 0.20mm / 32ga

Vandy Vape Mesh V2 style coils - 10pk

Pack of ten mesh wire strips for use in the Vandy Vape Mesh V2 RDA (and similar) as the resistance wire heating element.

These mesh coils create a very large surface area for maximum performance.

Available options:
Kanthal A1 M Coil 0.15Ω - Power range: 50-65W
Ni80 M Coil Coil 0.15Ω - Power range: 45-65W
Dual Kanthal A1 M Coil 0.15Ω - Power range: 45-70W
SS316L M Coil 0.12Ω - Power range: 50-70W - Temp range 360 - 420F

Each mesh coil measures 17mm x 9.8mm