Stattqualm SQuape A[rise] 24mm Nano 2ml DLC Edition
 

The SQuape A[rise] is a high quality swiss-made RTA by Stattqualm. In keeping with all the previous SQuape atomisers the A[rise] is designed to be simple to build, very durable, and easy to manage on a daily basis.

The A[rise] features top fill through two large fill ports accessed simply by twisting the top cap and now the cap has stops to make it even easier to fill. The air flow and liquid flow are both adjustable by twisting the tank. The tank can be completely sealed off and removed without fear of spilling eliquid and it can even be transported completely full of liquid separate from the base. The A[rise] features a unique design which allows for the air flow to be restricted right at the coil by use of 'air disks' so you can get that really tight MTL vape or a nice wide open DL vape right out of the box. The guys at StattQualm have done it again and we feel this could be their best offering to date.

This SQuape A[rise] has been coated with a diamond like carbon (DLC) that gives a black or gunmetal appearance (depending on light conditions). 

Features

• Designed and manufactured in Switzerland
• 316L Stainless steel construction with DLC coating
• Top fill through two large fill ports (twisting top cap with stops)
• Stepless air flow adjustment (simple twist of the tank)
• Three position tank system, "vape (with adjustable air flow)" "lock", or "remove" 
• Single coil build deck with ematal non-conductive coating
• Leak free tank removal
• MTL or DL (MTL air disks included 1mm, 2x0.8mm, 3x0.8mm, 4x0.8mm)
• Additional air disk sizes available separately 0.8mm and 5x0.8mm
• Adjustable gold plated 510 pin
• Removable PSU viewing window
• 24mm diameter
• 2ml capacity

Kit Contents

• SQuape A[rise] DLC Edition tank (partially assembled)
• SQuip tip
• MTL adapter parts (air disks and chimney reducer)
• Closing ring with assembly instructions
• SQ grib band
• 5mm hex key
• Spare o-rings and coil screws
• User manual

Dimensions (approx)
Diameter: 24mm
Length:  33.8mm (not including 510 thread or drip tip)

IMPORTANT:
As with all rebuildables, this is an advanced RTA and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style.Please be sure you have done your research prior to purchase in order to understand what's required to build and use this device. We strongly recommend you test any coils you produce with a multimeter before using to avoid risk of damaging your battery. Return requests for any reason other than a genuine manufacturing fault will not be accepted.