Aspire Loomix Vape Kit

Aspire Loomix Refillable pod vape kit

The Aspire Loomix pod kit is a compact and versatile refillable vape device that adapts effortlessly to virtually any vaping style. Flavour is king, thanks to the advanced mesh design coils within the top fill pods. Powered by a built-in 1500mAh battery and delivering up to 27W of output, this pocket-friendly kit supports MTL (Mouth-To-Lung) and RDL (Restricted Direct Lung) draws, depending on your pod choice. The slim, ergonomic design pairs a clean front panel with a discreet integrated display, making it an ideal choice for vapers who want flexibility and long battery life without the bulk.

Top up your e-liquid in seconds via the straightforward top-fill system. The transparent PCTG pod lets you keep an eye on your juice level at a glance, while the adjustable airflow ring gives you full control over draw resistance. With a choice of Eco and Max power modes, and a wide range of available pod resistances from 0.4Ω through to 1.0Ω, the Loomix caters equally well to beginners stepping up from disposables and experienced vapers after a reliable daily driver.

Features

• Built-in 1500mAh battery for all-day vaping
• Up to 27W maximum output
• Eco and Max power modes
• USB-C fast charging at up to 2A (full charge in under 60 mins)
• Top-fill 2ml pod with transparent PCTG construction
• Adjustable airflow control
• Integrated display showing battery percentage and mode
• 0.8Ω pod included, with 0.4Ω, 0.6Ω and 1.0Ω options available separately in two sizes
• Supports MTL and RDL vaping styles
• Mesh coil pods for improved flavour and longevity
• Compact, pocket-friendly form factor
• Aspire ASP chipset with comprehensive safety protections

All-day battery with rapid recharge

The Loomix houses a 1500mAh integrated battery that's been engineered to comfortably see most vapers through a full day of use, particularly when paired with a higher-resistance pod in Eco mode. When it's time to top up, the USB-C port supports 2A fast charging and will take the device from flat to full in less than an hour. The integrated display shows your battery level as a clear percentage readout, so there are no guessing games about when you'll need to plug in.

Customisable airflow to match any style

The adjustable airflow control lets you fine-tune the draw from a tight MTL inhale right through to a fairly loose, but not too wide open RDL pull. Combined with the Eco and Max power modes accessed via the fire button, this gives you a good range of vaping experiences from a single device. Eco mode conserves battery and e-liquid for a more measured, flavour-forward vape, whilst Max mode unlocks the full 27W output for denser vapour and richer intensity (the full 27W power output will only be activated when using Max mode with the 0.4Ω pod).

Intuitive operation with built-in safety

The Loomix offers the best of both worlds when it comes to firing: simply inhale for automatic draw activation. A quick press of the button also brings up the integrated display for battery and mode information, whilst pressing the button three times toggles between Eco and Max power modes. Under the bonnet, the Aspire ASP chipset delivers a comprehensive suite of safety protections including short circuit, overcharge, over-discharge and overheat protection, so you can vape with confidence.

A pod for every vaping style

The Loomix system is built around a wide range of mesh-coil pod options, giving you genuine flexibility to change your vaping style without changing your device. The 1.0Ω pod is designed for tight MTL vaping, making it ideal for the recent smoker. The included 0.8Ω pod sits in the middle ground, suiting the majority of MTL vapers. For looser MTL vaping, try the 0.6Ω option with a slightly more open airflow setting, and for those who really prefer an airier draw and a bit more heat, it's the 0.4Ω pod with a the airflow set to wide open. All pods are designed for use with 50/50 balanced PG/VG e-liquids. Replacement Loomix pods are available separately here.

Clean, quick top-fill refilling

1. Remove mouthpiece. Snap off the black cap by pushing sideways and up with your thumb (it helps if you brace with your index finger the other side of the pod).
2. Locate the fill port. Underneath the cap, you'll see two holes, an open central hole (for airflow) and a membrane-covered fill port) there are two holes
3. Fill with e-liquid. Push your bottle nozzle down into the fill port located to the side of the central air hole and squeeze the bottle gently to fill. Never put e-liquid into the central hole. 
4. Do not overfill. Fill to about 90% capacity leaving a small air bubble at the top of the pod to prevent leaks caused by pressure buildup. 
5. Replace the mouthpiece. Snap the mouthpiece back onto the top of the pod. Ensure it clicks into place securely.
6. Prime the coil. When using a new pod, wait 5-10 minutes before vaping to allow the e-liquid to fully saturate the cotton wick, preventing a burnt taste.

 

Aspire Loomix pod kit package contents

• Loomix device
• Loomix 0.8Ω pod (2ml)
• USB Type-C charging cable
• User manual

Approximate dimensions:
10.9cm x 2.6cm x 1.5cm

 

Why the Aspire Loomix pod kit is a top choice

The Aspire Loomix pod kit is one of the most flexible sub-£20 pod devices Aspire has put out in recent years. The 1500mAh battery and 27W output are more than enough for a solid day's vaping, and the Eco/Max mode switch means you can dial the power to suit the pod and the occasion. Filling simply couldn't be easier and quicker and the range of available pod resistances, from 0.4Ω up to 1.0Ω, means the Loomix can genuinely serve as an MTL device or an RDL device depending on which pods you stock up on. Combined with the compact form factor, top-fill refilling, dual activation, and clear percentage-based battery display, this is a kit that will suit new vapers stepping up from disposables just as well as experienced vapers after a reliable everyday backup.