Muted+ SE RTA by Arcana Mods

Arcana Mods Muted+ SE Rebuildable Tank Atomiser

The Muted+ Special Edition is another take on the Muted RTA Series. This tank is mechanically it is identical to the Muted+ RTA, so everything that makes that tank special is here untouched. The difference is all in the look: the SE arrives with the steel tank and narrow glass, like the original Muted RTA, and the cleaner "Pure" top cap, for a sleeker, more premium profile. As Arcana put it, if you place value on a more refined aesthetic, you reach for the SE.

The idea at the heart of the Muted is a lovely one. Where most atomisers announce their airflow with a whistle and a visible row of holes, the Muted does exactly what its name suggests. It is a side-air RTA whose inlets are hidden from view, so it draws almost silently and keeps a wonderfully clean, minimalist look. That hidden side airflow, first proven on the Cocoon RTA and developed in close coordination with Steampipes, brings a real practical benefit on side by side mods too, where a concealed inlet cannot be accidentally covered by your hand or the mod itself.

Three ways to take your air

Like the Muted+, the Muted+ SE pairs that hidden side air with a second, bottom airflow path. Arcana call it a Triple-Air RTA, because you can run it three ways: as a pure side-air tank for that near silent, invisible draw, as a pure bottom-air tank, or with both paths open together. Everything is set simply by swapping airpins, with no need to change any other part.

Out of the box the Muted+ SE is set up primarily for Mouth-to-lung (MTL), and it gives you plenty of room to dial in the exact draw you like. You get a full set of side airpins, 0.6mm, 0.8mm, 0.9mm and 1.0mm, plus a fully closed pin, and a set of bottom airpins in 0.6mm, 0.8mm and 1.2mm with their own closed pin. They swap in quickly without you having to take down your build. On the side air you can run one pin or a matched pair, and a pair opens the draw up further (two 0.8mm pins behave like roughly a single 1.13mm, two 1.0mm like around 1.41mm, and so on).

If you would like to open things up further still, a separately available RDL airpin set (1.3mm, 1.4mm and 1.6mm) teams up with the RDL airflow ring, which visibly exposes the air holes to allow the extra airflow an RDL draw needs. That ring is of course just as suitable on an MTL setup if you simply prefer the look. For tighter or more open MTL there are optional Tight MTL (0.6mm and 0.7mm) and Open MTL (1.1mm and 1.2mm) side airpin sets, and a Bottom-Airpin Kit (1.0mm, 1.4mm and 1.6mm) to extend the bottom airflow options too.

A single coil, kept simple

Underneath sits a straightforward single coil bottom deck with a genuinely spacious build area and a wrapping aid that helps you set the coil at exactly the right height, so it sits perfectly in the airflow for excellent compression. Position it a touch lower for more throat hit, or higher for a softer compression if you prefer. A very small chamber above concentrates everything into the pure, intense flavour a well made MTL RTA does so well, and the draw stays smooth and near silent with a punchy throat hit that never turns scratchy.

Top fill with liquid control

Filling is simple and mess free. A turn of the Pure top cap anti-clockwise closes off the liquid control and opens the tank for topping up, then turning it back the other way seals the tank and opens the liquid control again. There is a neat safeguard built in too: the ring beneath the top cap rotates if you grip more than just the cap, which stops you opening the tank by accident. The 4.1ml tank holds a generous amount for an atomiser this size, and an optional tank extension adds a further 2ml at a time if you would like to carry more between fills.

Made to Arcana's standard, and made your own

As you would expect from Arcana Mods and Pipeline, the Muted+ SE is machined from 316L stainless steel with PEEK insulation and no visible O-rings to spoil the lines. What sets the SE apart is its steel tank section, worn in place of the full glass for that more understated, premium look, with a spare glass tank in the box should you want to switch back. It comes with the Muted drip tip base and both a 316L stainless steel and a POM mouthpiece, so you can set the feel and warmth of the draw to your taste. From there it is lovely to personalise, with accent rings in different colours (to coordinate with mods from Arcana & Pipeline), various tip options, a nano tank kit, alternate top caps such as the 2Gear, the Bottom-Airpin Kit, and a diamond-cut conversion kit to make your Muted+ SE your own. Handily, the Muted+ and the original Muted share nearly all of their parts, so they interchange freely, the only exceptions being the beauty rings and the bottom airpins.

In common with all atomisers, allow a few minutes after building, wicking and filling for the cotton to fully saturate before your first vape, to avoid any dry hits.

Features

• Special Edition of the Muted+ RTA, technically identical but finished with a steel tank section and the Pure top cap for a more premium look
• Hidden side-air inlets, invisible from the outside, for near silent operation
• Triple-Air design: run it as pure side-air, pure bottom-air, or both together
• Ideal on side by side mods, the hidden side air cannot be accidentally blocked
• Single coil bottom deck with a spacious build area, a wrapping aid and a very small chamber for intense flavour
• Primarily MTL, adaptable from tight MTL through to RDL with optional airpin sets and the RDL airflow ring
• 14 airpins included: side (2x each 0.6mm, 0.8mm, 0.9mm, 1.0mm plus 2x closed) and bottom (0.6mm, 0.8mm, 1.2mm plus closed), run one or two at a time
• Airpins swap in quickly without removing your build
• Generous top fill with Liquid Control, close the LC and open the top cap in one turn
• Top cap ring guards against opening the tank by accident
• No visible o-rings
• Cross-compatible with the standard Muted+ and the original Muted (bar the beauty rings and bottom airpins)
• 316L stainless steel, borosilicate glass and PEEK construction

Approximate dimensions
22mm diameter x 40.5mm height (without drip tip)

Kit Contents

• 1 x Muted+ SE RTA with steel tank section, glass and Pure top cap
• 1 x Replacement glass tank
• 1 x "Muted" drip tip base with "Muted" 316L stainless steel mouthpiece
• 1 x "Muted" POM mouthpiece
• 2 x Side airflow pin 0.6mm
• 2 x Side airflow pin 0.8mm
• 2 x Side airflow pin 0.9mm
• 2 x Side airflow pin 1.0mm
• 2 x Side airflow pin closed
• 1 x Bottom airflow pin 0.6mm
• 1 x Bottom airflow pin 0.8mm
• 1 x Bottom airflow pin 1.2mm
• 1 x Bottom airflow pin closed
• 1 x Spare parts (O-rings and screws)
• 1 x Instructions for use

Explore the rest of the Arcana Mods and Pipeline range.

*IMPORTANT NOTES
The Muted+ SE is a self-winding, rebuildable atomiser and is supplied without a coil, so it is intended for experienced vapers who are comfortable building and wicking their own. Each air pin has its size engraved on it for easy identification. As with all rebuildables, please check your build and resistance on a suitable device before use.

The Muted+ SE ships set up with a 15x1 O-ring at the top of the base and a 16x1 O-ring at the bottom, which is our recommended configuration. The spare parts bag includes both sizes, so you can tune the liquid control to your liking: two 15x1 O-rings for a very smooth action, two 16x1 for a tighter one, or the standard mix of a 15x1 on top and a 16x1 on the bottom for something in between.