Dicodes Dani Box Mini
The Dicodes Dani Box Mini is a high quality regulated device packed with features and powered by the very well regarded Dicodes electronics. Capable of 80W of power and temperature control with various wire types, the firmware allows the user to select one of 4 different modes of operation, allowing the user to switch between variable watt, variable watt with heat protection, variable watt with power boost, or variable temperature. You can turn off the extended features to simplify the menu selections if you wish.
This 18650 size box mod is even more compact and pocket friendly than the original Dani Box. The top and bottom sections of the device are made from a brushed stainless steel and the body is anodised aluminium. Please note: the anodised colour of the body can vary in shade from the photos slightly. We do our best to take accurate photos to represent each batch that arrives.
Navigating the menu interface is surprisingly simple with three buttons and can be operated to change settings easily with one hand. The top mounted OLED display screen shows all important information either while you vape, set to only display after your puff, or it can be turned off completely for a stealth mode. The variable temperature feature of this device is extremely accurate and the user can adjust for just about any temperature control capable wire type they so choose. The device can be locked and unlocked with 5 clicks and the up and down buttons can also be locked by holding them both down at once. This is one of the easiest menu systems to use for a device with so many features.
This device does not have an external USB port, battery must be removed and charged separately, OR available separately is the Dicodes CS1 Charging Station
The Dani Box Mini is precision machined in Germany and backed by a two year warranty on the electronics*.
- 80 watts of power
- 0.05 – 5 ohm capable
- OLED display
- Powered by a single 18650 (not included)
- Spring-loaded center pin
- Temperature controlled vaping mode with support for various wire-types
- Optimized for dicodes resistance wire RESISTHERM (Sample included)
- Reverse battery protection
- Versatile and easy to use menu structure
- Individual user preferences selection
- 2 year warranty
- Made in Germany
- Dicodes Dani Box Mini in the colour of your choice
- User guide (QR Code to online user manual)
- Sample of Dicodes NiFe wire
- Supplied in a custom metal tin
Two year warranty covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty.
Recommended Battery (NOT included)
Sony VTC5A 2500mAh Battery
Sony VTC6 18650 3000mAh Battery
Support, discussion and tips can all be found in the dedicated Dicodes Facebook group.
Important:No tank or atomiser included. To benefit from the temperature limit settings a coil made from NiFe, SS, titanium or Ni200 wire is required. Standard Nichrome or Kanthal A1 may only be used in wattage mode and will not allow temperature control. Flat top 18650 battery required.
This product cannot be sent to the UK by Standard Royal Mail First Class post due to compensation limits.